Tandem Axle Trailer for 26'-27'9" Pontoon Boats

    The 226 bunk style pontoon trailer is a tandem axle trailer specifically designed to carry pontoon boats & tri-tube pontoon boats that have a length of 26'-27'9".  Built tough with a 4500 lb. carrying capacity, and weighing in at 1440 lbs. it is made with a 1/8" thick 2"x4" frame and a 3/16" thick 3"x4" tongue.  Has 21' long 2x6 bunks with plastic bunk wrap standard (no more torn bunk carpeting) that adjust from 70" to 78" center to center to perfectly match any pontoon boat made today. Two 3500 lb. galvanized axles, four 13" load range D radial tires on galvanized steel wheels, a modern concealed 2" hydraulic Brake coupler with an electric back up solenoid if you opt for brakes, allowing you to back up without the need to insert a special pin or needing to have special equipment on your tow vehicle.  The large winchstand has wide steps for easier climbing, a 3200 lb. front loading winch and a high lift 1800 lb. swing away tongue jack with large locking wheel standard.  Select between our thick ArmorTex black powder coated finish or choose a hot dipped galvanized finish for the ulitmate in rust protection.    

Standard Features of 226 tandem axle bunk style pontoon trailer

• 31'10" overall length (from tip to tail) with a 4500 lb. carrying capacity
• 21' long Plastic Bunk Wrap covered 2x6 bunks 
  
• 2- 3500 lbs. galvanized axles & 4- load range D ST175/80R13 radial tires
• Large winchstand with 3200 lb. loading winch and a large easy climb ladder.
• DOT rated LED Lights with IP64 waterproof rating 
  
• Brake models have
  • 10" Hydraulic Disc brakes (part of the hub, not cheap slide on rotors)
  • Modern 2" HD Hydraulic Brake Coupler with reverse lock out solenoid (automatically disengages the brakes when vehicle is placed in reverse)
• Select the following options in the dropdown menu
  
  • Brakes or No Brakes, 10" Hydraulic surge brakes with back up solenoid
  • Tri-Tube kit? for tri-tube pontoon boats
    • Regular Tri-Tube Kit, adds a center bunk that is fully adjustable in height (up & down) & pitch (can be set as V or flat depending on tube)
    • Stern Extension with Tri-Tube kit for boats w/ extended center tubes.
  • Trailer Finish, select black powder coated or galvanized finish
    • Black Powder Coat with our textured ArmorTex textured finish or
    • Hot Dipped Galvanized finish, for the ultimate in rust prevention

Available Add on Options for our Tandem Axle Pontoon Trailers

• Load / Wind Guides, for easier loading of your pontoon boat found here
• 8000 lb. Tongue Jack with Flat Plate bottom found here
• BoatBuckle G2 Bolt on 2" Transom Straps (set of 2) found here
• Heavy Duty BoatBuckle G3 Bolt on 2" Transom Straps (set of 2) found here
• 13" Aluminum wheels instead of galvanized ($100 per wheel) found here
• 18" Aluminum wheels instead of 14" galvanized ($200 per wheel) found here
• Spare Tire, select either standard U bolt mount or upgraded side mount carrier found here *Note, If you are getting the Tri-Tube package you must do the side mounted spare tire carrier due to space limitations.
  

*We will call or email you after the order to get the year, make & model of your pontoon boat so that we can ensure that you are getting the correct trailer to match your boat.  We will also use that information to set the trailer up prior to your arrival so little to no adjustments will need to be done by you.