BX-328TT Tri-Tube Center Lift Style Trailer

     The BX-328TT center lift triple tube pontoon trailer has been in production since 1997 and comes in with either a hydraulic motor (BX-328TT/Hyd) or a hand crank version (BX-328TT/HC).  It has three spring axles with six 12" radial tires.  You can purchase this with a Hydraulic motor and dual hydraulic rams, or as a hand crank.  The hydraulic version is preferred by marine dealers who move 100's if not 1000's of tri-tube boats in the spring and fall.  The hand crank version uses a HD self locking winch and a 7 to 1 pulley system.  These are made by Hoosier Trailer and they produce about 300 of these a year for use all around the USA.  Trailer has side guides to keep tubes and more importantly lifting strakes away from the tires when driving down the road.  The side guides are adjustable so that you can bring them in or out depending on the width of your tubes and lifting strakes. 

    Trailer has a outside width of 46" and an inside width of 38.5".  The raised height of the trailer is 43.5" and the lowered height of the top rail is 27".  Has DOT approved IP68 waterproof LED lights, and the hydraulic version even has a trickle charger wire that connects to the positive terminal on the battery (marine battery not included) on the trailer to keep the battery charged while connected to the tow vehicle.  The Hydraulic version has a carrying capacity of 6000 lbs. while the hand crank version has a carrying capacity of 4000 lbs. (due to the limitations of the winch).

    This is a proven product that has been used on thousands of triple tube pontoon boats.  However, these trailers will not work on all brands of triple tube pontoons. Bennington has a model with an elliptical center tube that doesn’t have enough space for the trailer. J.C. has a model with bracing between the center and outer tubes that prevents our trailer from fitting. But, the trailer will fit many of the triple tube pontoons. Bennington (except for the elliptical tube *requires Bennington package version) Avalon, Bentley, Crest, Forest River Marine (Berkshire, South Bay, Xcursion), Harris, J. C. (except the JC Tri-Toon model) Manitou, Godfrey Marine (Godfrey, Sweetwater, Aqua Patio, Sanpan), Premier, Starcraft, Sylvan, Tahoe, Tracker, etc.  The triple axle triple tube hydraulic will also work with most 8’6” wide two tube pontoon boats as well making it the ultimate trailer for marine dealers who do pontoon and tri-tube boat storage.  

Other Available Options for the BX-328TT Trailer;

• Bennington Elliptical kit - Makes the trailer wider at 48" outside width and adds 4"x4" wood kit to the top to raise the boat higher, allowing space for the elliptical center tube.  
• Narrow Kit - Narrows the trailer to 44" outside width with an inside width of 36.5"
• Viaggio Package - Changes side guides to composite 1x4's and adds 4"x4" wood kit to top to raise the boat higher to allow for larger 27" tubes. 
• Evotti Package - Makes the trailer wider at 48" outside width, adds 4"x4" wood kit to the top, and changes out composite 2"x4" side guides to 1"x4" boards.  Allowing more space for the larger eliptical center tube.
• 4x4 Wood Kit - Adds 4x4 wood to the top of the trailer frame.

*Brake package is available, however due to tight tollerances required the only brakes that can be used on trailer are small 7" drum brakes. These are not strong enough for the weight of the trailer and boat, and due to this we do not recomend brakes on this trailer.  With that said, that is the opinion of TrailersForPontoons.com and this decision is completely up to you. 

**TrailersForPontoons.com recomends that you use a vehicle addiqute to stop the load, i.e. a 3/4 ton pickup truck or larger.

https://youtu.be/21CikCgaUNw?si=2HN73PILO_FgWlxc