Triple Axle HD Trailer for 24'-25'9" Pontoon Boats

    The 324HD trailer is a triple axle Heavy Duty Pontoon & Tri-tube pontoon boat trailer for the heaviest of boats with a deck length of 28'-29'9".  Has a 8000 lbs. carrying capacity, with the trailer itself weighing in at 1600 lbs. and has 22' long 2x6 bunks that adjust from 72" to 78" center to center. 

    All of our Heavy Duty triple axle trailers have a 1/8" thick 2x5" outer frame, joints with welds on all four sides (including the underside), full length Ultra Bracing that runs the full length of the trailer for a trailer frame that will not bow or flex traveling down the highway and a 3"x5" center tongue that is 3/16" thick.  Has three 3500 lb. axles, 14" load range D radial tires on galvanized steel wheels, a modern concealed Heavy Duty 2" hydraulic Brake coupler with an electric back up solenoid, allowing you to back up without the need to insert a special pin or needing to have special equipment on your tow vehicle.  The large winchstand has 16" wide steps, a 3200 lb. front loading winch & Anti-Bucking loop to keep the front of the boat from "bucking up & down" while traveling down the highway, and a high lift 1800 lb. swing away tongue jack with large locking wheel standard.

Standard Features of Heavy Duty Triple Axle Trailer

• 30'6" overall length (from tip to tail)
• 19' long 2x6 carpeted bunks (upgrade to plastic bunk wrap covered 2x6 bunks $150)
• 1490 lb. trailer with a 8000 lb. carrying capacity
• 10" Hydraulic Disc brakes on the back two axles
• 3- 3500 lbs. galvanized axles & 6- load range D 205/75R14 radial tires on galvanized steel wheels
• DOT rated LED Lights with IP64 waterproof rating 
• Modern 2" HD Hydraulic Brake Coupler with Reverse Lock out solenoid

Available Options for Heavy Duty Triple Axle Trailers

• Tri-Tube Kit, adds 3/4 length Tri-Tube bunks that fully adjustable in height (up & down) & pitch of bunks (can be set as V or flat depending on center tube)
• Stern Extension kit for Tri-Tube Pontoons with extended rear transom pods
• Load Guides (for easy loading, even in windy conditions)
• 8000 lb. Tongue Jack with Flat Plate bottom
• Bolt on 2" Transom Tie Down Straps (set of 2) installed on trailer
• 14" Aluminum wheels instead of galvanized steel wheels ($110 per wheel)
• 18" Aluminum wheels instead of 14" galvanized steel wheels ($200 per wheel)
• Spare Tire, select either standard U bolt mount or upgraded side mount carrier
• Third Brake Axle (for states that mandate brakes on all trailer axles) 
• 10' Wide Kit for 10' wide Pontoon & Tri-Tube Pontoon Boats (See 10' wide trailers trailers with this option)

*We will call or email you after the order to get the year, make & model of your pontoon boat so that we can ensure that you are getting the correct trailer to match your boat. 

**We will also use that information to set the trailer up prior to your arrival so little to no adjustments will need to be done by you.